Instructions

RIGOL Chapter 2 Command System
2-82 DSG800 Programming Guide
:STATus:QUEStionable:CALibration:CONDition
Syntax
:STATus:QUEStionable:CALibration:CONDition?
Description Query the value of the condition register for the questionable calibration status register.
Explanation  The relation between the calibration status register and questionable status register
is as shown in the figure below.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Questionable Status Register
+
FREQuency
POWer
MODulation
TEMPerature
CALibration
SELFtest
CONNect
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Calibration Status Register
+
FM/PM External Modulation
LF
IQ
PM
Frequency Reference
AM
ALC
FM
AM External Modulation
To Status Byte,
Bit 3
 The definitions of the questionable calibration status register are as shown in the
table below. Wherein, bit 0 and bit 9 to bit 15 are not used and will be always
treated as 0. The range of the return value are the decimal numbers corresponding
to the binary numbers ranging from 0000000000000000 (0 in decimal) to
1111111111111111 (32767 in decimal) and of which the bit 0 and bit 9 to bit 15 are
0 (bit 2 and bit 4 cannot be 1 at the same time).
Bit
Value
Definition
0
1
Not Used
1
2
AM
2
4
FM
3
8
LF
4
16
ØM
5
32
FM/ØM External Modulation
6
64
AM External Modulation
7
128
IQ
8
256
Frequency Reference
9
0
Not Used
10
0
Not Used
11
0
Not Used
12
0
Not Used
13
0
Not Used
14
0
Not Used
15
0
Not Used
Return
Format
The query returns the value of the condition register of the questionable calibration
status register in integer. For example, 24.