Instructions

RIGOL Chapter 2 Command System
2-108 DSG800 Programming Guide
:TRIGger Commands
Command List:
 :TRIGger:IQ[:IMMediate]
 :TRIGger:PULSe[:IMMediate]
 :TRIGger[:SWEep][:IMMediate]
:TRIGger:IQ[:IMMediate]
Syntax
:TRIGger:IQ[:IMMediate]
Description Trigger an IQ wavetable output immediately.
Explanation When the "Trig Mode" of IQ wavetable is set to "Bus", the instrument starts
outputting an IQ baseband signal each time this command is sent.
Example
:TRIG:IQ
Related
Command
*TRG
:TRIGger:PULSe[:IMMediate]
Syntax
:TRIGger:PULSe[:IMMediate]
Description Trigger a pulse modulation immediately.
Explanation When the "Trig Mode" of pulse modulation is set to "Bus", the instrument starts a
pulse modulation each time this command is sent.
Example
:TRIG:PULS
Related
Command
*TRG
:TRIGger[:SWEep][:IMMediate]
Syntax :TRIGger[:SWEep][:IMMediate]
Description Trigger a RF sweep immediately.
Explanation
When the "Trig Mode" or "Point Trig" mode of SWEEP is set to "Bus" and the
corresponding trigger condition is met, the instrument starts a RF sweep within the
sweep period or sweeps a point and then stops each time this command is sent.
Example
:TRIG:SWE
Related
Command
*TRG