Instructions

Chapter 1 Programming Overview RIGOL
DSG800 Programming Guide 1-3
Remote Control Methods
1. User-defined programming
You can program and control DSG800 using the SCPI (Standard Commands for Programmable
Instruments) commands listed in chapter 2
Command System in various development environments
(such as Visual C++, Visual Basic and LabVIEW). For the details, refer to the introductions in chapter 4
Programming Demos.
2. Send SCPI commands via PC software
You can use the PC software Ultra Sigma (provided by RIGOL) to send SCPI commands to control the
RF signal generator remotely.