Instructions

ManualsBrandsRigol ManualsFunction GeneratorsRigol DSG836A Mains-powered 9 kHz - 3.6 GHz

Chapter 2 Command System RIGOL

DSG800 Programming Guide 2-29

[:SOURce]:IQ:BASeout:LEVel

Syntax [:SOURce]:IQ:BASeout:LEVel <value>

[:SOURce]:IQ:BASeout:LEVel?

Description Set the baseband output amplitude.

Query the baseband output amplitude.

Parameter

Name

Type

Range

Default

<value> Real 20mV to 1.5V 1V

Explanation  When <value> is set in "Number" form, the default unit is V. Besides, <value>

can also be set in "Number + Unit" form; for example, 1.1V.

 The default unit of the return value is V.

 After the baseband output amplitude is set, you can rotate the knob to modify

the amplitude at the current step. At this point, you can set and query the

current step using the [:SOURce]:IQ:BASeout:LEVel:STEP command.

Return Format The query returns the amplitude of the baseband output signal. For example,

1.100000.

Example :IQ:BAS:LEV 1.1

:IQ:BAS:LEV?

Command

[:SOURce]:IQ:BASeout:LEVel:STEP

Syntax [:SOURce]:IQ:BASeout:LEVel:STEP <value>

[:SOURce]:IQ:BASeout:LEVel:STEP?

Description Set the baseband output amplitude step.

Query the baseband output amplitude step.

Parameter

Name Type Range Default

<value>

Real

0.01V to 0.5V

0.1V

Explanation  When <value> is set in "Number" form, the default unit is V. Besides, <value>

can also be set in "Number + Unit" form; for example, 0.2V.

 The default unit of the return value is V.

 After the baseband output amplitude step is set, you can rotate the knob to

modify the baseband output amplitude at the current step. At this point, you can

query or set the baseband output amplitude using the

[:SOURce]:IQ:BASeout:LEVel command.

Return Format The query returns the baseband output amplitude step. For example, 0.200000.

Example

:IQ:BAS:LEV:STEP 0.2

:IQ:BAS:LEV:STEP?

Command

[:SOURce]:IQ:BASeout:LEVel