Instructions

RIGOL Chapter 2 Command System
2-32 DSG800 Programming Guide
[:SOURce]:IQ:SAMPle:STEP
Syntax [:SOURce]:IQ:SAMPle:STEP <value>
[:SOURce]:IQ:SAMPle:STEP?
Description Set the sample rate step of the IQ wavetable output.
Query the sample rate step of the IQ wavetable output.
Parameter
Name Type Range Default
<value> Real 1Hz to 10MHz 1MHz
Explanation  When <value> is set in "Number" form, the default unit is Hz; for example,
3000. In addition, <value> can also be set in "Number + Unit" form; for
example, 3kHz.
 The default unit of the return value is Hz.
 After the sample rate step of IQ wavetable output is set, you can rotate the
knob to modify the sample rate at the current step. At this point, you can query
or set the sample rate using the [:SOURce]:IQ:SAMPle command.
Return Format The query returns the sample rate step of the IQ wavetable output. For example,
3000.
Example :IQ:SAMP:STEP 3kHz
:IQ:SAMP:STEP?
Related
Command
[:SOURce]:IQ:SAMPle
[:SOURce]:IQ:TRIGger:ARB
Syntax [:SOURce]:IQ:TRIGger:ARB
Description Stop the waveform output manually.
Explanation
When the operation mode after the IQ wavetable is triggered is set to "Arm Auto" or
"Arm Retrig", you need to use this command to stop the waveform output manually
and wait for the next trigger.
Related
Command
[:SOURce]:IQ:TRIGger:OPTMode