Instructions

Chapter 2 Command System RIGOL
DSG800 Programming Guide 2-39
[:SOURce]:IQ:TRIGger:SEGMent:MODE
Syntax [:SOURce]:IQ:TRIGger:SEGMent:MODE SAME|NEXT|SEAMLESS|SEQUENCER
[:SOURce]:IQ:TRIGger:SEGMent:MODE?
Description Set the trigger mode of the IQ data segment.
Query the trigger mode of the IQ data segment.
Parameter
Name
Type
Range
Default
SAME|NEXT|SEAMLESS
|SEQUENCER
Discrete
SAME|NEXT|SEAMLESS
|SEQUENCER
SAME
Explanation  SAME: select the "Same Seg" mode. At this point, the RF signal generator
outputs the same trigger segment.
 NEXT: select the "Next Seg" mode. At this point, the instrument will switch to
the output of the next segment when the
[:SOURce]:IQ:TRIGger:SEGMent:EXECute command is sent.
 SEAMLESS: select the "Seamless" mode. At this point, the instrument will switch
to the output of the next segment seamlessly when the
[:SOURce]:IQ:TRIGger:SEGMent:EXECute command is sent. This parameter is
valid only when the sample rates of all the waveform segments in the
"Segment" file loaded are the same.
 SEQUENCER: select the "Sequencer" mode. At this point, the instrument
outputs each waveform segment according to the "Seg List" (*.SEQ) file or "Seg
csv" (*.CSV) file loaded. At this point, the
[:SOURce]:IQ:TRIGger:SEGMent:NEXT and
[:SOURce]:IQ:TRIGger:SEGMent:EXECute commands are invalid. In addition,
this parameter is valid only when the "Seg List" file or "Seg csv" file is loaded.
 The command is valid only when the "Segment" file is loaded.
Return Format
The query returns the trigger mode of the IQ data segment. For example, SAME.
Example :IQ:TRIG:SEGM:MODE SAME
:IQ:TRIG:SEGM:MODE?
Related
Commands
[:SOURce]:IQ:TRIGger:SEGMent:EXECute
[:SOURce]:IQ:TRIGger:SEGMent:NEXT