Instructions

RIGOL Chapter 2 Command System

2-42 DSG800 Programming Guide

[:SOURce]:LEVel:STEP

Syntax [:SOURce]:LEVel:STEP <value>

[:SOURce]:LEVel:STEP?

Description Set the RF output amplitude step.

Query the RF output amplitude step.

Parameter

Name Type Range Default

<value>

Real

0.01dB to 100dB

10dB

Explanation  When <value> is set in "Number" form, the default unit is dB. Besides, <value>

can also be set in "Number + Unit" form; for example, 20dB.

 The default unit of the return value is dB.

 After the output amplitude step is set, you can rotate the knob to modify the

output amplitude at the current step. At this point, you can query or set the

output amplitude using the [:SOURce]:LEVel command.

Return Format The query returns the RF output amplitude step. For example, 20.00.

Example

:LEV:STEP 20

:LEV:STEP?

Command

[:SOURce]:LEVel