Instructions

Chapter 2 Command System RIGOL
DSG800 Programming Guide 2-51
[:SOURce]:PULM Command Subsystem
Command List
[3]
:
 [:SOURce]:PULM:MODE
 [:SOURce]:PULM:OUT:STATe
 [:SOURce]:PULM:PERiod
 [:SOURce]:PULM:PERiod:STEP
 [:SOURce]:PULM:POLarity
 [:SOURce]:PULM:SOURce
 [:SOURce]:PULM:STATe
 [:SOURce]:PULM:TRAin:LIST:COUNt
 [:SOURce]:PULM:TRAin:LIST:GET
 [:SOURce]:PULM:TRIGger:DELay
 [:SOURce]:PULM:TRIGger:DELay:STEP
 [:SOURce]:PULM:TRIGger:EXTernal:GATE:POLarity
 [:SOURce]:PULM:TRIGger:EXTernal:SLOPe
 [:SOURce]:PULM:TRIGger:MODE
 [:SOURce]:PULM:WIDTh
 [:SOURce]:PULM:WIDTh:STEP
[:SOURce]:PULM:MODE
Syntax [:SOURce]:PULM:MODE SINGle|TRAin
[:SOURce]:PULM:MODE?
Description Set the pulse modulation mode.
Query the pulse modulation mode.
Parameter
Name
Type
Range
Default
SINGle|TRAin
Discrete
SINGle|TRAin
SINGle
Explanation  SINGle: set the pulse type to "single" and enable the single pulse modulation
mode.
 TRAIn: set the pulse type to "Train" and enable the train pulse modulation
mode.
 When "Ext" modulation source is selected, this command is invalid.
Return Format The query returns SINGLE or TRAIN.
Example
:PULM:MODE SING
:PULM:MODE?
Related
Command
[:SOURce]:PULM:SOURce
Note
[3]
: To use the commands related to "Pulse Modulation" and "Pulse Generator", you need to install the
DSG800-PUM option; to use the related commands of "Train", you need to install the DSG800-PUG option; otherwise,
the command settings are invalid. For the installation methods of the option, refer to
DSG800 User's Guide .