Instructions

RIGOL Chapter 2 Command System
2-64 DSG800 Programming Guide
[:SOURce]:SWEep:MODE
Syntax [:SOURce]:SWEep:MODE CONTinue|SINGle
[:SOURce]:SWEep:MODE?
Description Set the sweep mode.
Query the sweep mode.
Parameter
Name
Type
Range
Default
CONTinue|SINGle
Discrete
CONTinue|SINGle
CONTinue
Explanation  CONTinue: select "Cont" sweep mode. The instrument sweeps continuously
according to the current setting when the trigger condition is met.
 SINGle: select "Single" sweep mode. The instrument performs a sweep
according to the current setting and then stops when the trigger condition is
met.
Return Format
The query returns the sweep mode (CONT or SING).
Example :SWE:MODE CONT
:SWE:MODE?