Instructions

RIGOL Chapter 2 Command System
2-66 DSG800 Programming Guide
[:SOURce]:SWEep:RESet[:ALL]
Syntax
[:SOURce]:SWEep:RESet[:ALL]
Description Reset all the sweeps to the start point.
Explanation  If the current sweep direction is "Fwd", the instrument will stop the current
sweep and sweep from the start frequency or start level after sending this
command.
 If the current sweep direction is "Down", the instrument will stop the current
sweep and sweep from the stop frequency or stop level after sending this
command.
Related
Command
[:SOURce]:SWEep:DIRection
[:SOURce]:SWEep:STATe
Syntax [:SOURce]:SWEep:STATe OFF|FREQuency|LEVel[,FREQuency]
[:SOURce]:SWEep:STATe?
Description Set the sweep manner.
Query the sweep manner.
Parameter
Name
Type
Range
Default
OFF|FREQuency|
LEVel[,FREQuency]
Discrete
OFF|FREQuency|LEVel|
LEVel,FREQuency
OFF
Explanation  OFF: turn off the sweep function.
 FREQuency: enable the frequency sweep function.
 LEVel: enable the level sweep function.
 LEVel,FREQuency: enable the frequency and level sweep functions at the same
time.
Return Format The query returns the sweep manner. For example, FREQ.
Example
:SWE:STAT FREQ
:SWE:STAT?