Instructions

Chapter 2 Command System RIGOL
DSG800 Programming Guide 2-67
[:SOURce]:SWEep:STEP:DWELl
Syntax [:SOURce]:SWEep:STEP:DWELl <value>
[:SOURce]:SWEep:STEP:DWELl?
Description Set the dwell time of step sweep.
Query the dwell time of step sweep.
Parameter
Name
Type
Range
Default
<value>
Real
20ms to 100s
100ms
Explanation  When <value> is set in "Number" form, the default unit is s. Besides, <value>
can also be set in "Number + Unit" form; for example, 3000ms.
 After the dwell time is set, you can rotate the knob to modify the dwell time at
the current step. At this point, you can query and set the current step using the
[:SOURce]:SWEep:STEP:DWELl:STEP command.
Return Format
The query returns the dwell time of step sweep. For example, 3.000000000s.
Example :SWE:STEP:DWEL 3
:SWE:STEP:DWEL?
Related
Command
[:SOURce]:SWEep:STEP:DWELl:STEP
[:SOURce]:SWEep:STEP:DWELl:STEP
Syntax [:SOURce]:SWEep:STEP:DWELl:STEP <value>
[:SOURce]:SWEep:STEP:DWELl:STEP?
Description Set the dwell time step.
Query the dwell time step.
Parameter
Name
Type
Range
Default
<value>
Real
10ms to 10s
10ms
Explanation  When <value> is set in "Number" form, the default unit is s. Besides, <value>
can also be set in "Number + Unit" form; for example, 3000ms.
 After the dwell time step is set, you can rotate the knob to modify the dwell time
at the current step. At this point, you can query or set the dwell time using the
[:SOURce]:SWEep:STEP:DWELl command.
Return Format The query returns the dwell time step. For example, 3.000000000s.
Example
:SWE:STEP:DWEL:STEP 3
:SWE:STEP:DWEL:STEP?
Related
Command
[:SOURce]:SWEep:STEP:DWELl