Instructions

RIGOL Chapter 2 Command System

2-68 DSG800 Programming Guide

[:SOURce]:SWEep:STEP:POINts

Syntax [:SOURce]:SWEep:STEP:POINts <value>

[:SOURce]:SWEep:STEP:POINts?

Description Set the number of points of step sweep.

Query the number of points of step sweep.

Parameter

Name

Type

Range

Default

<value>

Integer

2 to 65535

Explanation  The number of sweep points decides the time interval between two neighboring

sweep points.

 After the number of sweep points is set, you can rotate the knob to modify the

number of sweep points at the current step. At this point, you can query or set

the current step using the [:SOURce]:SWEep:STEP:POINts:STEP command.

Return Format

The query returns the number of sweep points. For example, 5.

Example :SWE:STEP:POIN 5

:SWE:STEP:POIN?

Command

[:SOURce]:SWEep:STEP:POINts:STEP

Syntax [:SOURce]:SWEep:STEP:POINts:STEP <value>

[:SOURce]:SWEep:STEP:POINts:STEP?

Description Set the step of the number of sweep points.

Query the step of the number of sweep points.

Parameter

Name

Type

Range

Default

<value> Integer 1 to 10000 1

Explanation After the step of the number of sweep points is set, you can rotate the knob to

modify the number of sweep points at the current step. At this point, you can query

or set the number of sweep points using the

[:SOURce]:SWEep:STEP:POINts

command.

Return Format The query returns the step of the number of sweep points. For example, 2.

Example :SWE:STEP:POIN:STEP 2

:SWE:STEP:POIN:STEP?

Command

[:SOURce]:SWEep:STEP:POINts