Instructions

RIGOL Chapter 2 Command System
2-72 DSG800 Programming Guide
[:SOURce]:SWEep:STEP:STARt:LEVel:STEP
Syntax [:SOURce]:SWEep:STEP:STARt:LEVel:STEP <value>
[:SOURce]:SWEep:STEP:STARt:LEVel:STEP?
Description Set the start level step of the sweep.
Query the start level step of the sweep.
Parameter
Name
Type
Range
Default
<value>
Real
0.01dB to 100dB
1dB
Explanation  When <value> is set in "Number" form, the default unit is dB. Besides, <value>
can also be set in "Number + Unit" form; for example, 20dB.
 The default unit of the return value is dB.
 After the start level step is set, you can rotate the knob to modify the start level
at the current step. At this point, you can query or set the start level using the
[:SOURce]:SWEep:STEP:STARt:LEVel command.
Return Format
The query returns the start level step of the sweep. For example, 20.00.
Example :SWE:STEP:STAR:LEV:STEP 20
:SWE:STEP:STAR:LEV:STEP?
Related
Command
[:SOURce]:SWEep:STEP:STARt:LEVel
[:SOURce]:SWEep:STEP:STOP:FREQuency
Syntax [:SOURce]:SWEep:STEP:STOP:FREQuency <value>
[:SOURce]:SWEep:STEP:STOP:FREQuency?
Description Set the stop frequency of the sweep.
Query the stop frequency of the sweep.
Parameter
Name Type Range Default
<value>
Real
9kHz to 3GHz
1GHz
Explanation  When <value> is set in "Number" form, the default unit is Hz. Besides, <value>
can also be set in "Number + Unit" form; for example, 4MHz.
 After the stop frequency is set, you can rotate the knob to modify the stop
frequency at the current step. At this point, you can query or set the current
step using the [:SOURce]:SWEep:STEP:STOP:FREQuency:STEP command.
Return Format
The query returns the stop frequency of the sweep. For example, 4.00000000MHz.
Example :SWE:STEP:STOP:FREQ 4MHz
:SWE:STEP:STOP:FREQ?
Related
Command
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP