Instructions

Chapter 2 Command System RIGOL
DSG800 Programming Guide 2-73
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP
Syntax [:SOURce]:SWEep:STEP:STOP:FREQuency:STEP <value>
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP?
Description Set the stop frequency step of the sweep.
Query the stop frequency step of the sweep.
Parameter
Name
Type
Range
Default
<value>
Real
10mHz to 1GHz
100MHz
Explanation  When <value> is set in "Number" form, the default unit is Hz. Besides, <value>
can also be set in "Number + Unit" form, for example, 3kHz.
 After the stop frequency step is set, you can rotate the knob to modify the stop
frequency at the current step. At this point, you can query or set the stop
frequency using the [:SOURce]:SWEep:STEP:STOP:FREQuency command.
Return Format The query returns the stop frequency step of the sweep. For example, 3.00000kHz.
Example
:SWE:STEP:STOP:FREQ:STEP 3kHz
:SWE:STEP:STOP:FREQ:STEP?
Related
Command
[:SOURce]:SWEep:STEP:STOP:FREQuency