Instructions

Chapter 2 Command System RIGOL
DSG800 Programming Guide 2-75
[:SOURce]:SWEep:STEP:STOP:LEVel:STEP
Syntax [:SOURce]:SWEep:STEP:STOP:LEVel:STEP <value>
[:SOURce]:SWEep:STEP:STOP:LEVel:STEP?
Description Set the stop level step of the sweep.
Query the stop level step of the sweep.
Parameter
Name Type Range Default
<value> Real 0.01dB to 100dB 1dB
Explanation  When <value> is set in "Number" form, the default unit is dB. Besides, <value>
can also be set in "Number + Unit" form; for example, 20dB.
 The default unit of the return value is dB.
 After the stop level step is set, you can rotate the knob to modify the stop level
at the current step. At this point, you can query or set the stop level using the
[:SOURce]:SWEep:STEP:STOP:LEVel command.
Return Format The query returns the stop level step of the sweep. For example, 20.000000.
Example
:SWE:STEP:STOP:LEV:STEP 20
:SWE:STEP:STOP:LEV:STEP?
Related
Command
[:SOURce]:SWEep:STEP:STOP:LEVel