Instructions

RIGOL Chapter 1 Quick Start
1-8 DSG800 User Guide
7. Arrow Keys/Step Key
When setting a parameter, Step is used to set the step of
the parameter currently selected; the arrow keys are used
to enter the parameter editing state and move the cursor
to the specified digit.
For the storage function, the arrow keys are used to
collapse and expand the directory currently selected.
When editing a filename, the arrow keys are used to
select the desired character.
In the parameter information display interface, the arrow
keys are used to switch the parameter tabs.
8. Power Key
It is used to turn on or off the RF signal generator. You can
use the following method to enable or disable this key.
Press Syst  Pwr Status to select "Default" or "Open".
When "Default" is selected, you need to press this key to
start the instrument after the instrument is powered on.
When "Open" is selected, the instrument will start
automatically after it is powered on.
Besides, this key provides the delayed switching function
(namely, the instrument can be turned on or off only
when you press this key and hold it down for a certain
period of time) to avoid the shut-down of the instrument
due to misoperation.
9. Store and Recall Key
Store and recall various types of files (such as the
instrument state). For the detailed information, refer to
"
Store and Recall".
10. System Setting Key
Set the system-related parameters. For the detailed
information, refer to "To Set the System Parameters".