Instructions

RIGOL Chapter 2 Front Panel Operations

2-34 DSG800 User Guide

relation:

T =

8) Segment Trigger Mode

Set the trigger mode of the I/Q data segment.

Press Seg Mode to select "Same Seg", "Next Seg", "Seamless" or

"Sequencer".

 Same Segment

When the "Same Seg" trigger mode is selected, the instrument outputs

the same trigger segment. When Next Seg is modified, the output

segment will change accordingly.

 Next Segment

When the "Next Seg" trigger mode is selected, the instrument will

switch to the output of the next segment when Execute Seg is

pressed. You can also output the corresponding segment of the

waveform by modifying Next Seg.

 Seamless

When the "Seamless" trigger mode is selected, the instrument will

switch to the output of the next segment seamlessly when Execute

Seg is pressed. This menu is only valid when the sample rates of all the

waveform segments in the "Segment" file loaded are the same.

 Sequencer

When the "Sequencer" trigger mode is selected, the instrument

outputs each waveform segment according to the "Seg List" (*.SEQ)

file or "Seg csv" (*.CSV) file loaded. At this point, Next Seg and

Execute Seg are grayed out and disabled. This menu is valid only

when the "Seg List" (*.SEQ) file or "Seg csv" (*.CSV) file is loaded.

Note: The above menus are valid only when the "Segment" (.SEG) file is

loaded.

9) Next Segment

You can press Next Seg to set the number of the next segment of the ARB.

10) Execute Segment

You can press Execute Seg to execute the trigger of the next segment.

This menu is only valid when the segment trigger mode is set to "Next Seg"

or "Seamless".