Instructions

RIGOL Chapter 2 Front Panel Operations
2-48 DSG800 User Guide
Display Setting
Control the screen display.
Press Syst  Display to set the "Scr State", "Brightness" and "Time/Date".
1. Screen State
Press Scr State to set the on/off state of the screen.
 On: the default state. Turn on the screen.
 Off: turn off the screen. At this point, the screen stops updating and is
locked; the measurement speed is improved. You can press ESC to unlock
the screen. Screen locking is mainly used in remote operation mode.
2. Brightness
Press Brightness to set the brightness of the LCD backlight of the RF signal
generator.
 Use the numeric keys, knob or arrow keys to modify this parameter.
 The range of the brightness is from 1 to 8.
3. Time/Date
You can press Time/Date to set the system time of the RF signal generator.
 Set Time
Set the time displayed on the RF signal generator. The input format of the
time is "hhmmss".
For example, 23:12:11 is expressed as 231211.
 Set Date
Set the date displayed on the RF signal generator. The input format of the
date is "YYYYMMDD".
For example, 2014/12/22 is expressed as 20141222.
 Time/Date
Turn on or off the display of the time and date.
Power Status
Press Syst  Pwr Status to select "Default" or "Open".
 When "Default" is selected, you need to press the power key at the front panel
to start the instrument after the instrument is powered on.
 When "Open" is selected, the instrument starts automatically after it is powered
on.