Datasheet
7
RIGOL
Data Bits 5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits 7 bit, 8 bit, 10 bit
Address Range 0 to 127, o to 255, 0 to 1023
Byte Length 1 to 5
SPI Trigge
r
Trigger Condition Timeout
Timeout Value 100 ns to 1 s
Data Bits 4 bit to 32 bit
Data Setting H, L, X
CAN Trigger (Option)
Signal Type Rx, Tx, CAN_H, CAN_L, Differential
Trigger Condition SOF, EOF, Frame Type, Frame Error
Baud 10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps,
800 kbps, 1 Mbps, User
Sample Point 5% to 95%
Frame Type Data, Remote, Error, Over Load
Error Type Bit Fill, Answer Error, Check Error, Format Error, Random Error
USB Trigger (Option)
Signal Speed Low Speed, Full Speed
Trigger condition SOP, EOP, RC, Suspend, Exit Suspend
Measure
Cursor
Manual Mode
Voltage Deviation between Cursors ( △ V)
Time Deviation between Cursors ( △ T)
Reciprocal of △ T (Hz) (1/ △ T)
Track Mode Voltage and Time Values of the Waveform Point
Auto Mode Allow to display cursors during auto measurement
Auto Measurement Analog channel:
Measurements of Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude,
Average, Mean Square Root, Overshoot, Pre-shoot, Area, Period Area, Frequency, Period, Rise Time,
Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle,
Delay 1
2 , Delay 1
2 , Phase 1
2 , Phase 1
2
Digital channel:
Frequency, Period, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty
Cycle, Delay 1
2 ,
Delay 1
2 , Phase 1
2 , Phase 1
2
Number of Measurements Display 5 measurements at the same time.
Measurement Range Screen Region or Cursor Region
Measurement Statistic Current, Average, Max, Min, Standard Deviation, Number of Measurements
Frequency Counter Hardware 6 bits frequency counter (channels are selectable)
Math Operation
Waveform Operation A+B, A-B, A×B, A÷B, FFT, Editable Advanced Operation, Logic Operation
FFT Window Rectangle, Hanning, Blackman, Hamming
FFT Display Split, Full Screen
FFT Vertical Scale Vrms, dB
Logic Operation AND, OR, NOT, XOR
Math Function Intg, Diff, Lg, Exp, Sqrt, Sine, Cosine, Tangent
Number of Buses for Decoding 2
Decoding Type Parallel (standard), RS232 (option), I2C (option) , SPI (option), CAN (option)
Display
Display Type 8.0 inches (203 mm) TFT LCD display
Display Resolution 800 Horizontal ×RGB×480 Vertical Pixel
Display Color 160,000 Color (TFT)
Persistence Time Min, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite
Display Type Dots, Vectors
Real-time Clock Time and Date (user adjustable)
Signal Source (MSO2000A-S/DS2000A-S)
Channels 2
Sample Rate 200 MSa/s
Vertical Resolution 14 bits
Max. Frequency 25 MHz
Standard Waveform Sine, Square, Pulse, Ramp, Noise, DC
Built-in Waveform Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, Lorentz, Haversine
Sine Frequency Range 100 mHz to 1 MHz
Flatness ±0.5 dB (relative to 1 kHz)
Harmonic Distortion -40 dBc
Stray(Non-harmonic) -40 dBc
Total Harmonic Distortion 1%
S/N Ratio 40 dB