Data Sheet

6 To Make Measurements RIGOL
MSO4000D/S4000 User’s Guide
6-23
All Measurement
All measurements can be enabled. This setting displays all of the time and voltage
parameters (each measurement source has 20 items, measurements can be
performed on the four measurement sources and MATH at the same time) of the
current measurement source and displays the results. Press Measure  All
Measure to enable or disable the all measurement function. Press All Measure
Source and use to select the channel(s) to be measured (CH1 to CH4 and
MATH).
 When all measurement is enabled, “One-key” measurement is also valid.
 “
To Clear the Measurement” will not clear the results of all measurement.
All Measurement
One-key
Measurement