Data Sheet

7 Logic Analyzer RIGOL
MSO4000D/S4000 User’s Guide
7-3
Group Setting
Press Group Set to enter the group setting menu and you can group 16 digital
channels.
 Group：
Press Group1 to open the channel list (there is a status icon at the left of each
channel), use
to select the desired channel and press to group the
channel into Group1. At this point, the corresponding status icon is
.
Group the other channels using the same method. Any channel can only be
grouped into one group. The channels grouped into other groups cannot be
selected and the status icon is
. The channels with can be selected.
 UnGroup
Press UnGroup to open the channel and group list, use to select the
desired channel or group and press
to cancel the grouping status of the
channel selected or all the channels contained in the group selected.
To Set the Waveform Size
Press WaveSize to adjust the waveform size of the channels that have been turned
on, you can select S (small), M (medium) or L (large).
Note: L is only available when the number of active channels is not more than 8.