Data Sheet

RIGOL 13 Store and Recall
MSO4000/DS4000 User’s Guide
13-14
To Create a New File or Folder
This operation is only valid in external storage. Before using an external disk, make
sure that the USB storage device is connected correctly.
First, press Storage  Disk.Manage and use to select and open the external
disk (“Disk D” or “Disk E”). Then, select the desired file type and select the desired
directory under which to create a new file or folder. The default is the root directory
of the USB storage device. Then, press New File or New Folder to turn on the
interface as shown in the figure below.
This oscilloscope supports Chinese/English input method. The file name or folder
name can contain letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 64 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn
to select the desired content and press down to input the content
selected.