Data Sheet

RIGOL 14 System Function Setting
MSO4000/DS4000 User’s Guide
14-6
USB Device
This oscilloscope can communicate with PC or printer via the USB Device interface
at the rear panel. You need to set the oscilloscope to make it match with different
device types.
Press Utility  IO Setting  USB Device and use to select the desired
device type.
 Computer: in this mode, the oscilloscope can communicate with the PC.
 PictBridge: in this mode, the oscilloscope can communicate with a PictBridge
printer.
To Set the GPIB Address
When using the GPIB mode to control the oscilloscope, you need to extend a GPIB
interface for the oscilloscope using the USB-GPIB interface converter (need to be
ordered separately).
To set the GPIB address of this interface, press Utility  IO Setting  GPIB and
use to input the desired address. The default is 1 and the range is from 1 to 30.