Data Sheet

17 Specifications RIGOL
MSO4000/DS4000 User’s Guide
17-5
Pulse Width Range 4 ns to 4 s
Runt Trigger
Pulse Polarity Positive, Negative
Qualifier None, >, <, <>
Nth Edge Trigger
Edge Type Rising, Falling
Idle Time 40 ns to 1 s
Number of Edges 1 to 65535
Slope Trigger
Slope Condition Positive Slope (greater than, lower than, within specific
interval)
Negative Slope (greater than, lower than, within specific
interval)
Time Setting 10 ns to 1 s
Video Trigger
Polarity Positive, Negative
Synchrony All Lines, Line Num, Odd Field, Even Field
Signal Standard Support standard NTSC, PAL and SECAM broadcasting
standards; support 480P, 576P, 720P, 1080P and 1080I HDTV
standards
Pattern Trigger
Pattern Setting H, L, X, Rising Edge, Falling Edge
RS232/UART Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud 2400bps, 4800bps, 9600bps, 19200bps, 38400bps,
57600bps, 115200bps, User
Data Bits 5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits 7 bit, 8 bit, 10 bit
Address Range 0 to 127, o to 255, 0 to 1023
Byte Length 1 to 5
SPI Trigger
Trigger Condition CS (Chip Select), Timeout
Timeout Value 100 ns to 1 s