Data Sheet

RIGOL 17 Specifications
MSO4000/DS4000 User’s Guide
17-6
Data Bits 4 bit to 32 bit
Data Line Setting H, L, X
Clock Edge Rising Edge, Falling Edge
CAN Trigger
Signal Type Rx, Tx, CAN_H, CAN_L, Differential
Trigger Condition SOF, EOF, Frame Type, Frame Error
Baud 10kbps, 20kbps, 33.3kbps, 50kbps, 62.5kbps, 83.3kbps,
100kbps, 125kbps, 250kbps, 500kbps, 800kbps, 1Mbps,
User
Sample Point 5% to 95%
Frame Type Data, Remote, Error, OverLoad
FlexRay Trigger
Baud 2.5 Mb/s, 5 Mb/s, 10 Mb/s
Trigger Condition Frame, Symbol, Error, TSS
USB Trigger
Signal Speed Low Speed, Full Speed
Trigger condition SOP, EOP, RC, Suspend, Exit Suspend
Measure
Cursor
Manual Mode
Voltage Deviation between Cursors (△V)
Time Deviation between Cursors (△T)
Reciprocal of △T (Hz) (1 /△ T )
Track Mode Voltage and Time Values of the Waveform
Point
Auto Mode Allow to display cursors during auto
measurement
Auto Measurement
Analog channel:
Measurements of Maximum, Minimum, Peak-Peak Value, Top
Value, Bottom Value, Amplitude, Average, Mean Square
Root, Overshoot, Pre-shoot, Area, Period Area, Frequency,
Period, Rise Time, Fall Time, Positive Pulse Width, Negative
Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay
AB , Delay AB , Phase AB , Phase AB
Digital channel: