Data Sheet

RIGOL 1 Quick Start
MSO4000/DS4000 User’s Guide
1-16
Front Panel Function Overview
VERTICAL
The MSO4000/DS4000 provides independent vertical control systems for each of the
four analog input channels.
 CH1, CH2, CH3, CH4: analog input channels. The four channels are marked
by different colors which are also used to mark the corresponding waveforms on
the screen and the channel input connectors. Press any key to open the
corresponding channel menu and press again to turn off the channel.
AC: illuminated when AC channel coupling is enabled.
50: illuminated when the channel input impedance is 50Ω.
BW: illuminated when bandwidth limit is enabled.
 MATH: press this key to open the math operation menu under which (add,
subtract, multiply, divide) operations, FFT operation, logic operation and
advanced operation are provided.
 REF: press this key to enable the reference waveform function to compare the
waveform actually tested with the reference waveform.
 VERTICAL POSITION: vertical position knobs. During the modification,
the position label at the lower left corner of the screen would change accordingly.
Turn clockwise to increase the position and counterclockwise to decrease. Press
down the knob to quickly reset the vertical position.
 VERTICAL SCALE: vertical scale knobs. During the modification, the scale
label at the bottom of the screen would change accordingly. Turn clockwise to