Data Sheet

1 Quick Start RIGOL

MSO4000/DS4000 User’s Guide

1-21

Default

Press this key and then press OK to restore the oscilloscope

to its default configuration.

Press this key to execute print function or save the screen

in the USB storage device. If the oscilloscope is currently

connected to a printer and the printer is in idle state, press

this key to execute print function. If no printer but a USB

storage device is currently connected, press this key to

save the screen to the USB storage device in “.bmp”

format. When printer and USB storage device are

connected at the same time, the printer enjoys higher

priority.

Function Keys

 Measure: press this key to enter the measurement setting menu.

 Acquire: press this key to enter the sample setting menu. Here, you can set the

acquisition mode, the memory depth, and the antialiasing function of the

oscilloscope.

 Storage: press this key to enter the file store and recall interface. The file types

available include traces, waveforms, setups, picture and CSV. This instrument

supports internal/external storage as well as disk management.

 Cursor: press this key to enter the cursor measurement menu. The oscilloscope

provides three cursor modes (manual, track and auto).