Data Sheet

RIGOL 1 Quick Start
MSO4000/DS4000 User’s Guide
1-22
 Display: press this key to enter the display setting menu to set the display type,
persistence time, wave intensity, grid type, grid brightness and menu display
time of the waveform.
 Utility: press this key to enter the system function setting menu to set the
system-related functions or parameters, such as I/O setting, sound and
language. The oscilloscope also supports some advanced functions such as
pass/fail test and print setting.
 Record: press this key to enter the waveform record menu to set the waveform
record and open (record constant on) mode.
 Help: press this key to open the help interface. For detailed information, please
refer to the introduction in “To Use the Built-in Help System”.
Record
Play/Pause: in stop or pause state, press this key to play the recorded or paused
waveform and press again to pause the play. The backlight is illuminated in yellow.
Stop: press this key to stop the waveform in record or playback mode. The backlight
is illuminated in orange.
Record: press this key to start recording the waveform. The backlight is illuminated
in red. Besides, the backlight will also be illuminated when the open (record constant
on) mode is enabled.
Stop Play/Pause Record