Data Sheet

RIGOL 6 To Make Measurements
MSO4000/DS4000 User’s Guide
6-22
To Clear the Measurement
If you have currently enabled one or more items in the 24 measurement parameters,
you can “Delete” or “Recover” the first five parameters or “Delete” or “Recover” all
the measurement items enabled. Note that the first five parameters are determined
according to the order in which you turned them on and they will not change as you
delete one or more measurement items.
Press Measure  Clear  Item n to “Delete” or “Recover” the specified
measurement item. When one measurement item is deleted or recovered, the
measurement results at the bottom of the screen will move one-item left or right.
Press Measure  Clear  All Item to “Delete” or “Recover” all the measurement
items enabled.
Note: Press and hold Measure to quickly clear or restore all the measurement items
enabled.