Data Sheet

10 Pass/Fail Test RIGOL
MSO4000/DS4000 User’s Guide
10-1
10 Pass/Fail Test
The MSO4000/DSO4000 features a Pass/Fail test that enables the ability to monitor
the change of an input signal and analyze whether the input signal is within a
user-defined limit mask. The test results can be displayed on the screen as well as be
declared by an audible beep or a pulse signal output from the [Trig
Out/Calibration] connector at the rear panel.
The contents of this chapter:
 To Enable Pass/Fail Test
 To Select Source
 To Create Mask
 Test and Ouput
 To Save the Test Mask
 To Load the Test Mask