Data Sheet

RIGOL 2 To Set the Vertical System
MSO4000/DS4000 User’s Guide
2-10
Channel Label
You can modify the labels used to mark the analog channels (CH1 to CH4) at the left
side of the screen. The label is the number of the channel (such as ) by default
and the length of the label can not exceed 4 characters.
Press CH1 Label to enter the label modification interface as shown in the figure
below.
For example, change “
” to “ ”.
Press Keyboard to select the “Keyboard” area. Select “Aa” using and press
down
to switch it to “
a
A”. Select “C” using and press down to input the
character. Use the same method to input “hn1”.
To modify or delete the input character, press Name to select the “Name Input Area”
and use
to select the character to be modified or deleted. Enter the desired
character or press Delete to delete the character selected.
After finishing the input, press OK to finish the modification and the channel label
will change to “
”.
Name Input Area Keyboard Upper/Lower Case Switch