Instructions

RIGOL Chapter 2 Command System
2-186 MSO5000-E Programming Guide
:TRIGger:DELay:SLOPb
Syntax :TRIGger:DELay:SLOPb <slope>
:TRIGger:DELay:SLOPb?
Description
Sets or queries the edge type of Edge B in Delay trigger.
Parameter
Name
Type
Range
Default
<slope>
Discrete
{POSitive|NEGative}
POSitive
Return
Format
The query returns POS or NEG.
Example
:TRIGger:DELay:SLOPb NEGative /*Sets the type of Edge B to NEGative.*/
:TRIGger:DELay:SLOPb? /*The query returns NEG.*/
:TRIGger:DELay:TYPE
Syntax :TRIGger:DELay:TYPE <type>
:TRIGger:DELay:TYPE?
Description
Sets or queries the delay type of Delay trigger.
Parameter
Name
Type
Range
Default
<type>
Discrete
{GREater|LESS|GLESs|GOUT}
GREater
Remarks  GREater: triggers when the time difference (
△
T) between the specified edges of
Source A and Source B is greater than the preset time limit.
 LESS: triggers when the time difference (△T) between the specified edges of
Source A and Source B is smaller than the preset time limit.
 GLESs: triggers when the time difference (△T) between the specified edges of
Source A and Source B is greater than the lower limit of the preset time and
smaller than the upper limit of the preset time. Note: The lower time limit must
be smaller than the upper time limit.
 GOUT: triggers when the time difference (△T) between the specified edges of
Source A and Source B is smaller than the lower limit of the preset time or
greater than the upper limit of the preset time. Note: The lower time limit must
be smaller than the upper time limit.
Return
Format
The query returns GRE, LESS, GLES, or GOUT.
Example
:TRIGger:DELay:TYPE GOUT /*Sets the delay type to "><".*/
:TRIGger:DELay:TYPE? /*The query returns GOUT.*/
:TRIGger:DELay:TUPPer
Syntax :TRIGger:DELay:TUPPer <time>
:TRIGger:DELay:TUPPer?
Description Sets or queries the upper limit of delay time of the Delay trigger. The default unit is
s.
Parameter
Name
Type
Range
Default
<time>
Real
8.01 ns to 10 s
2 μs