Instructions
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- MSO5000-E Series Overview
- Document Overview
- Quick Start
- General Inspection
- Appearance and Dimensions
- To Prepare for Use
- Front Panel Overview
- Rear Panel Overview
- Front Panel Function Overview
- User Interface
- Touch Screen Controls
- Parameter Setting Method
- To Use the Kensington Security Lock
- To Use the Built-in Help System
- To View the Option Information and the Option Installation
- To Set the Vertical System
- To Set the Horizontal System
- To Set the Sample System
- To Trigger the Oscilloscope
- Trigger Source
- Trigger LEVEL/Threshold Level
- Trigger Mode
- Trigger Coupling
- Trigger Holdoff
- Noise Rejection
- Trigger Type
- Edge Trigger
- Pulse Trigger
- Slope Trigger
- Video Trigger
- Pattern Trigger
- Duration Trigger
- Timeout Trigger
- Runt Trigger
- Window Trigger
- Delay Trigger
- Setup/Hold Trigger
- Nth Edge Trigger
- RS232 Trigger (Option)
- I2C Trigger (Option)
- SPI Trigger (Option)
- CAN Trigger (Option)
- FlexRay Trigger (Option)
- LIN Trigger (Option)
- I2S Trigger (Option)
- MIL-STD-1553 Trigger (Option)
- Zone Trigger
- Trigger Output Connector
- Operations and Measurements
- Digital Voltmeter (DVM) and Frequency Counter
- Power Analysis (Option)
- Histogram Analysis
- Digital Channel
- Protocol Decoding
- Reference Waveform
- To Enable Ref Function
- To Select the Reference Channel
- To Select the Ref Source
- To Adjust the Ref Waveform Display
- To Save to Internal Memory
- To Clear the Display of the Reference Waveform
- To View Details of the Reference Waveform
- To Reset the Reference Waveform
- Color Setting
- Label Setting
- To Export to Internal or External Memory
- To Import from Internal or External Memory
- Pass/Fail Test
- Waveform Recording & Playing
- Search and Navigation Function
- Display Control
- Function/Arbitrary Waveform Generator (Option)
- Store and Load
- System Utility Function Setting
- Remote Control
- Troubleshooting
- Appendix
- Index
RIGOL Index
2 MSO5000-E User Guide
Pulse Width Setting................... 5-11
Qualifier .................................. 5-24
Ramp ...................................... 17-4
-Rate ....................................... 6-34
Rectangular ............................... 6-9
Rise Time ................................ 6-29
Rising Edge Count .................... 6-30
Roll ........................................... 4-4
RS232 Decoding ....................... 11-7
RS232 Trigger .......................... 5-32
Runt Trigger ............................. 5-23
Sample Point 5-41, 5-45, 11-29, 11-34
Sample Rate .............................. 4-7
Setup&Hold Trigger................... 5-29
Setups ..................................... 18-3
Sine ........................................ 17-2
Slope Condition ........................ 5-13
Slope Time Setting ................... 5-13
Slope Trigger ............................ 5-12
SPI Decoding .......................... 11-18
SPI Trigger ............................... 5-37
Square .................................... 17-3
Start Keep .................... 17-17, 17-18
Start Phase .............................. 17-3
Static IP .................................. 19-3
Subnet mask ............................ 19-4
Sweep ......................... 17-16, 17-19
Sweep Trigger Source ... 17-18, 17-19
Symmetry ................................ 17-4
Sync ........................................ 5-16
To Create the Waveform ........... 17-10
Triangle ..................................... 6-9
Trigger Coupling ......................... 5-5
Trigger Holdoff ........................... 5-6
Trigger LEVEL/Threshold Level ..... 5-3
Trigger Mode .............................. 5-4
Trigger Position ......................... 5-26
tVmax ...................................... 6-30
tVmin ....................................... 6-30
Vamp .............................. 6-33, 17-2
Vavg ........................................ 6-33
Vbase ...................................... 6-33
Vector ...................................... 16-2
Vertical Offset ............................. 2-4
Vertical Scale .............................. 2-3
Video Polarity ........................... 5-15
Video Standard ......................... 5-15
Video Trigger ............................ 5-15
VISA .......................................
19-5
Vlower ..................................... 6-33
Vmax ....................................... 6-33
Vmid ........................................ 6-33
Vmin ........................................ 6-33
Vpp ......................................... 6-33
Vrms ........................................ 6-34
Vtop ........................................ 6-33
Vupper ..................................... 6-33
Waveform Aliasing ....................... 4-8
Waveform Distortion .................... 4-8
Waveform Leakage ...................... 4-8
Waves ...................................... 18-3
-Width ..................................... 6-30
Window trigger ......................... 5-25
Windows Type .......................... 5-26
XY ............................................. 4-2
YT ............................................. 4-2