Data Sheet

Quick Reset of Statistics

Quickly reset all the measurement statistics data and measurement counts.

Quickly reset all the statistics information in PassFail function.

Quick Waveform Recording Quickly start or stop the waveform recording.

Quick Email Sending Quickly send the Email based on the set email address.

Quick Print Quickly perform the print operation based on the current printer settings.

Quick Group Saving Quickly perform the group saving function based on the currently selected item for saving.

Command Set

Common Commands Support IEEE488.2 Standard

Error Message Definition Error messages

Support Status Report Mechanism Status reporting

Support Syn Mechanism Synchronization

Display

LCD 9-inch capacitive multi-touch screen/gesture enabled operation

Resolution 1024×600 (Screen Region)

Graticule (10 vertical divisions) x (8 horizontal divisions)

Persistence Off, Infinite, variable persistence (100 ms to 10 s)

Brightness 256 intensity levels (LCD,HDMI)

I/O

USB 2.0 Hi-speed Host Port 1 on the front panel

USB 2.0 Hi-speed Device Port 1 on the rear panel, compatible with USB Test and Measurement Class (USBTMC)

LAN 1 on the rear panel, 10/100/1000-port, supporting LXI-C

GPIB GPIB-USB adapter (option)

Web Remote Control

Support VNC Web interface (input the IP address of the oscilloscope into the Web browser to

display the operation interface of the oscilloscope)

Aux Out

BNC output on the rear panel.

Vo (H)≥2.5 V open circuit, ≥1.0 V 50 Ω to GND

Vo (L)≤0.7 V to load ≤4 mA; ≤0.25 V 50 Ω to GND

Trigger Output Output a pulse signal when the oscilloscope is triggered.

Pass/Fail

Output a pulse signal when a pass/fail event occurs. Supports user-

defined pulse polarity and pulse time (100 ns~10 ms).

HDMI video output 1 on the rear panel, HDMI 1.4b, A plug. used to connect to an external monitor or projector

Probe Compensation Output 1 kHz, 3 Vpp square waveform

Power

Power Supply

Power Voltage 100 V-240 V, 45 Hz-440 Hz

Power Max. 75 W (connect to various interfaces, USB)

Fuse 4 A, T degree, 250 V

Environment

Environmental Stress

Temperature Range

Operating 0℃~+50℃

Non-operating -30℃~+70℃