Datasheet

10
RIGOL
Hardware Waveform Recording and Playback
The memory depth is one of the key specifications of the
oscilloscope. However, whatever high the memory depth,
it cannot be guaranteed that all the signals that users are
concerned about can be captured in one time. This is
especially true for the occurrence of the infrequent signals
during debugging design or locating specific events from
the long captured complicated signals. In addition, the long
memory depth will be bound to reduce the response time
for the oscilloscope. The hardware waveform recording and
playback function can address this issue.
The MSO5000 series provides ceaseless recording and
playback for a maximum of 450,000 frames of hardware
real-time waveforms. This specification is second to
none in the industry. The hardware waveform recording
function adopts the segmented storage technology. With
the technology, you can set the trigger conditions to make
a selective choice in capturing and saving the signals that
you are interested in, then mark the time on the signal. This
has not only ensured the high capture efficiency, but also
prolonged the overall observation time for the waveforms.
The hardware waveform playback function enables you to
have sufficient time to take a careful view and analysis of
the recorded segment of the waveforms.