Instructions

Chapter 18 Store and Load RIGOL
MSO7000/DS7000 User's Guide 18-3
2. Wave
Press Save Wave to enter the waveform storage setting interface. Save the
main setting information (e.g. "On/Off" state of the channel, vertical scale, and
horizontal time base) and waveform data of all enabled channels (analog
channel and digital channel) to the external memory.
After selecting this type:
 Press Data Source to select "Screen" or "Memory".
 Press Format to select the format of the waveform storage, such as "*.bin",
"*.cvs", and "*.wfm" (when "Memory" is selected under Data Source).
 Press File Name to input the file name to be saved. For filename input,
refer to descriptions in "To Create a Folder". Press More  Auto Name
to select "ON", then the filename is generated automatically. If the filename
that you input is the same as the existing filename, a prompt message will
be displayed, reminding you that the existing file will be overwritten and
asking you whether to continue or not.
 Press Channel, and then the available storage channels include CH1-CH4
and D0-D15. Only when you select "Memory" under Data Source and the
format is "*.bin" or "*.cvs", can you set the storage channel.
 Press Window to display or hide the disk management interface.
 Press Save to save the set waveform file.
3. Setup
Press Save Setup to enter the setup setting interface. Save the setups of the
oscilloscope to the internal or external memory in "*.stp" format. The stored
setups can be recalled.
After selecting this type:
 Press File Name to input the file name to be saved. For filename input,
refer to descriptions in "To Create a Folder". Press More  Auto Name
to select "ON", then the filename is generated automatically. If the filename
that you input is the same as the existing filename, a prompt message will
be displayed, reminding you that the existing file will be overwritten and
asking you whether to continue or not.
 Press Save to save the set setup file.
Load Type
This oscilloscope provides two load types: waveform load and setup load. The
descriptions of each load type are as follows.
1. Waveform Load