Data Sheet

RIGOL

A Variety of Triggers and Protocol Decodings

Zone Trigger

MSO7000/DS7000 series digital oscilloscope provides

powerful trigger functions, including Edge trigger, Pulse

trigger, Slope trigger, Video trigger, Pattern trigger, Duration

trigger, Timeout trigger, Runt trigger, Window trigger,

Delay trigger, Setup/Hold trigger, Nth Edge trigger, and

serial protocol trigger. These triggers can help engineers

accurately and quickly capture and identify the signals of

great interest.

In face of the complex and variable circuit signal in the

circuit debugging, it is easy for us to find the transient

occasional exception signals on the oscilloscope with a high

waveform capture rate. However, it is not easy to isolate

the exceptional signal from the complex circuit signals and

trigger them stably. You have to spend more time on the

usage of some advanced trigger types, and sometimes

even the powerful advanced trigger is unable to make it.

The MSO7000/DS7000 series is specially equipped with

touch screen-based zone trigger function, which can help

users accelerate the signal isolation process. The zone

trigger function is easy to operate. You only need to use

the specified rectangle drawing gesture to draw one or two

rectangular zones on the corresponding signal section, then

you can quickly isolate the signal for observation.

The zone trigger can work with other 20 trigger types, and

it also supports the decoding, waveform recording, and

pass/fail test functions. This is conducive to the debugging

of the complex signals.

The optional serial protocol decoding is capable of decoding

4 serial buses simultaneously. The full memory data

analysis and the decoding event table display can help

engineers quickly find out the system failure and locate the

symbol error waveforms, greatly improving the debugging

efficiency of the overall system signals. The MSO7000/

DS7000 series also provides optional decodings such as

RS232/UART, I2C, SPI, CAN, LIN, I2S, FlexRay, and MIL-

STD-1553. These serial bus decodings can help engineers

make a deep analysis on the waveforms, and they are

widely applied to the auto electronics, aerospace, and other

fields. Besides, the oscilloscope has a standard parallel bus

decoding, which is capable of performing the debugging

test for the mixed signals of up to 20 channels (analog

channel and digital channel) simultaneously.

Draw a rectangle on the transient exception signal and select Trigger zone A.

Quickly isolate the exceptional signal with Edge trigger and Zone trigger.