Instructions

Installation Guide RIGOL
1
RIGOL RM6041 Rack Mount Kit
This rack mount kit is designed to mount RIGOL RSA5000 series real-time spectrum
analyzer or MSO7000/DS7000 series digital oscilloscope into a standard 19-inch cabinet that
conforms to the Electronic Industries Association (EIA) standard.
Kit Part Checklist
No. Name Qty. Description
1 Rear Bracket 2
——
2 M4 Screw 16 M4 × 6 Phillips Pan Head Screw
3 Left Plate 1
——
4 Retaining Bracket 2
——
5 Top Plate 1
——
6 Right Plate 1
——
7 Bottom Plate 1
——
8 M6 Screw 6 M6 × 16 Phillips Pan Head Screw
9 M6 Nut 6 M6 Square Lock Cage Nut
2 8 9
1
2
3
4
5
6
7
Installation Guide RIGOL
2
Installation Tool
The PH2 Phillips screwdriver is recommended.
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
 The cabinet must be a standard 19-inch one.
 The available height of the cabinet should be at least 6U (266.7 mm).
 The depth of the cabinet should be at least 200 mm.
The dimensions of the rack-mounted instrument are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
477.9
266.7
169.5