User Manual

RIGOL
6 RP1001C User’s Guide
AC Power Adapter
1 The specified AC power adapter can be used to avoid
measurement error due to poor battery durability.
2 When using an AC power adapter for an extended time, you
are recommended to remove the battery. This is because
heating will result in battery leakage, and battery electrolyte
will rust the circuit board, thus creating major damage.
Furthermore, as batteries are high pollution products, you are
recommended to avoid using them as far as possible.
Cleaning
To clean the probe exterior, use a soft cloth dampened in a
solution of mild detergent and water. To clean the core, open the
test clamp and clean the exposed core surfaces with a cotton swap
dampened with isopropyl alcohol (isopropanol). Lubricate the
clamp mating surfaces with light oil.
Note: Do not clean with solvents or abrasives. Do not immerse the
probe.