Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-13
:CALCulate:FSCan:SLISt:APPend:METer
Syntax
:CALCulate:FSCan:MARKer<n>[:SET]:SLISt
Description
Adds the frequency of the meter to the signal table.
:CALCulate:FSCan:SLISt:DELete:SIGNal
Syntax
:CALCulate:FSCan:SLISt:DELete:SIGNal <integer>
Description
Deletes the selected signal(s) from the signal table.
Parameter
Name
Type
Range
Default
<integer>
Integer
1 to 2,000
--
Example
The following command deletes Signal 20 from the signal table.
:CALCulate:FSCan:SLISt:DELete:SIGNal 20
:CALCulate:FSCan:SLISt:MARK:ALL
Syntax
:CALCulate:FSCan:SLISt:MARK:ALL
Description
Marks all the signals in the signal table.
:CALCulate:FSCan:SLISt:MARK:CLEar:ALL
Syntax
:CALCulate:FSCan:SLISt:MARK:CLEar:ALL
Description
Clears all the marks in the signal table.
:CALCulate:FSCan:SLISt:MARK:CLEar:SIGNal
Syntax
:CALCulate:FSCan:SLISt:MARK:CLEar:SIGNal <integer>
Description
Clears the mark of the specified signal.