Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-32 RSA3000E Programming Guide
:CALCulate:MARKer<n>[:SET]:STEP
Syntax
:CALCulate:MARKer<n>[:SET]:STEP
Description
Sets the frequency of the specified marker to the center frequency step of the analyzer.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
Remarks
If the marker mode of the specified marker is Position or Fixed, the center frequency step will be set to the
frequency of the marker.
If the specified marker mode is Delta, the center frequency step will be set to the frequency difference
between the Delta marker and the reference marker.
This function is invalid in zero span.
This command is invalid for the PvT measurement mode in RTSA.
Example
The following command sets the frequency of Marker 4 (Position) to the center frequency step of the
analyzer.
:CALCulate:MARKer4:SET:STEP
:CALCulate:MARKer<n>[:SET]:STOP
Syntax
:CALCulate:MARKer<n>[:SET]:STOP
Description
Sets the frequency of the specified marker to the stop frequency of the analyzer.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
Remarks
If the marker mode of the specified marker is Position or Fixed, the stop frequency will be set to the
frequency of the marker.
If the specified marker mode is Delta, the stop frequency will be set to the frequency of the Delta marker.
This function is invalid in zero span.
This command is invalid for the PvT measurement mode in RTSA.
Example
The following command sets the frequency of Marker 2 (Position) to the stop frequency of the analyzer.
:CALCulate:MARKer2:SET:STOP