User manual

RIGOL Chapter 2 Command System
2-156 RSA3000 Programming Guide
[:SENSe]:SIGCapture:2FSK:MARK2:SWitch[:STATe]
Syntax
[:SENSe]:SIGCapture:2FSK:MARK2:SWitch[:STATe] OFF|ON|0|1
[:SENSe]:SIGCapture:2FSK:MARK2:SWitch[:STATe]?
Description
Enables or disables Mark 2.
Queries the on/off status of Marker 2.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only available for RTSA mode and valid when the SSC function is enabled.
Return Format
The query returns 0 or 1.
Example
The following command enables Marker 2.
:SENSe:SIGCapture:2FSK:MARK2:SWitch:STATe ON or :SENSe:SIGCapture:2FSK:MARK2:SWitch:STATe 1
The following query returns 1.
:SENSe:SIGCapture:2FSK:MARK2:SWitch:STATe?
[:SENSe]:SIGCapture:2FSK:MAXHold[:STATe]
Syntax
[:SENSe]:SIGCapture:2FSK:MAXHold[:STATe] OFF|ON|0|1
[:SENSe]:SIGCapture:2FSK:MAXHold[:STATe]?
Description
Enables or disables the Max Hold.
Queries the on/off status of the Max Hold.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Remarks
When the Max Hold is enabled (i.g. the SSC function is enabled), the signal captured each time will be
compared with the last captured signal, whichever is the larger value will be displayed as the max hold
trace.
Return Format
The query returns 0 or 1.
Example
The following command enables the Max Hold.
:SENSe:SIGCapture:2FSK:MAXHold:STATe ON or :SENSe:SIGCapture:2FSK:MAXHold:STATe 1
The following query returns 1.
:SENSe:SIGCapture:2FSK:MAXHold:STATe?