User manual

RIGOL Chapter 2 Command System
2-188 RSA3000 Programming Guide
:TRACe Commands
Command List:
 :TRACe:CLEar:ALL
 :TRACe[:DATA]
 :TRACe:MATH:A
 :TRACe:MATH:B
 :TRACe:MATH:CONSt
 :TRACe:MATH:PEAK[:DATA]?
 :TRACe:MATH:PEAK:POINts?
 :TRACe:MATH:REFerence
 :TRACe:MATH:STATe
 :TRACe:MATH:TYPE
 :TRACe:PRESet:ALL
 :TRACe<n>:DISPlay:STATe
 :TRACe<n>:MODE
 :TRACe<n>:TYPE
 :TRACe<n>:UPDate:STATe
:TRACe:CLEar:ALL
Syntax
:TRACe:CLEar:ALL
Description
Clears all the traces, that is, all the points on the trace will be reset to the minimum value of the trace.
:TRACe[:DATA]
Syntax
:TRACe[:DATA]
TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6,<definite_length_block>|<comma_separated_ASCII
_data>
:TRACe[:DATA]? TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6
Description
Load the user data into the specified trace.
Query the logarithmic data of the specified trace.
Parameter
Name
Type
Range
Default
-- Keyword
TRACE1|TRACE2|TRACE3|TRACE4|
TRACE5|TRACE6
--
<definite_length_block>
ASCII String
--
--
<comma_separated_ASCII_data>
ASCII String
--
--