User manual

Chapter 2 Command System RIGOL
RSA3000 Programming Guide 2-205
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
——
<freq>
Consecutive Real Number
0 Hz to 4.5 GHz
<ampl>
Consecutive Real Number
-1,000 dBm to 1,000 dBm
Remarks
When <n> is set to 1, it indicates that the upper mask is being edited; when it is set to 2, it indicates that
the lower mask is being edited.
This command is only valid when you select FMT to be the trigger source in RTSA working mode.
Return Format
The query returns the mask parameters that are being edited currently in scientific notation.
Example
The following command edits the two points of the upper mask.
:TRIGger:SEQuence:FMT:MASK1:DATA –80000000, –50, 80000000, –50
The following query returns –8.000000e+07, –5.000000e+01, 8.000000e+07, –5.000000e+01
:TRIGger:SEQuence:FMT:MASK1:DATA?
:TRIGger[:SEQuence]:FMT:MASK<n>:DELete
Syntax
:TRIGger[:SEQuence]:FMT:MASK<n>:DELete
Description
Deletes all the masks.
Parameter
Name Type Range Default
<n>
Discrete
1|2
——
Remarks
When <n> is set to 1, edit the upper mask; when set to 2, edit the lower mask.
This command is only valid when you select FMT to be the trigger source in RTSA mode.
:TRIGger[:SEQuence]:FMT:MASK<n>:NEW
Syntax
:TRIGger[:SEQuence]:FMT:MASK<n>:NEW
Description
Clears the currently activated mask and creates a default new mask.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
——
Remarks
When <n> is set to 1, it indicates that the upper mask is being edited; when it is set to 2, it indicates that