User manual

RIGOL Chapter 2 Command System
2-12 RSA3000 Programming Guide
:CALCulate:LLINe<n>:TRACe
Syntax
:CALCulate:LLINe<n>:TRACe 1|2|3|4|5|6
:CALCulate:LLINe<n>:TRACe?
Description
Sets the trace to be tested against the current limit line.
Queries the trace to be tested against the current limit line.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6
——
——
Discrete
1|2|3|4|5|6
Refer to "Remarks"
Remarks
Limit Line 1 and 2: The default is Trace 1.
Limit Line 3 and 4: The default is Trace 2.
Limit Line 5 and 6: The default is Trace 3.
Return Format
The query returns 1, 2, 3, 4, 5, or 6.
Example
The following command sets that Trace 2 is tested against Limit Line 3.
:CALCulate:LLINe3:TRACe 2
The following query returns 2.
:CALCulate:LLINe3:TRACe?
:CALCulate:LLINe<n>:TYPE
Syntax
:CALCulate:LLINe<n>:TYPE UPPer|LOWer
:CALCulate:LLINe<n>:TYPE?
Description
Sets the type of the specified limit line.
Queries the type of the specified limit line.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6
——
——
Keyword
UPPer|LOWer
Refer to "Remarks"
Remarks
Limit Line 1, Limit Line 3, and Limit Line 5 belong to the upper type; Limit Line 2, Limit Line 4, and Limit Line
6 belong to the lower type.
Return Format
The query returns UPP or LOW.
Example
The following command sets Limit Line 2 to the upper type.