User manual

Chapter 2 Command System RIGOL
RSA3000 Programming Guide 2-13
:CALCulate:LLINe2:TYPE UPPer
The following query returns UPP.
:CALCulate:LLINe2:TYPE?
:CALCulate:MARKer:AOFF
Syntax
:CALCulate:MARKer:AOFF
Description
Turns off all the enabled markers.
:CALCulate:MARKer:COUPle[:STATe]
Syntax
:CALCulate:MARKer:COUPle[:STATe] OFF|ON|0|1
:CALCulate:MARKer:COUPle[:STATe]?
Description
Enables or disables the couple marker function.
Queries the state of the couple marker function.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
When you enable the couple marker function, moving any marker will make other markers (that are not
fixed or off) move along with it.
Return Format
The query returns 0 or 1.
Example
The following command disables the couple marker function.
:CALCulate:MARKer:COUPle:STATe OFF or :CALCulate:MARKer:COUPle:STATe 0
The following query returns 0.
:CALCulate:MARKer:COUPle:STATe?
:CALCulate:MARKer:PEAK:EXCursion
Syntax
:CALCulate:MARKer:PEAK:EXCursion <rel_ampl>
:CALCulate:MARKer:PEAK:EXCursion?
Description
Sets the peak offset. Its unit is dB.
Queries the peak offset.