User manual

Chapter 2 Command System RIGOL
RSA3000 Programming Guide 2-25
Return Format
The query returns 1 or 0.
Example
The following command enables the band span auto function of Marker 1.
:CALCulate:MARKer1:FUNCtion:BAND:SPAN:AUTO ON
or :CALCulate:MARKer1:FUNCtion:BAND:SPAN:AUTO 1
The following query returns 1.
:CALCulate:MARKer1:FUNCtion:BAND:SPAN:AUTO?
:CALCulate:MARKer<n>:LINes[:STATe]
Syntax
:CALCulate:MARKer<n>:LINes[:STATe] OFF|ON|0|1
:CALCulate:MARKer<n>:LINes[:STATe]?
Description
Enables or disables the marker line of the specified marker.
Queries the status for the marker line of the specified marker.
Parameter
Name
Type
Range
Default
<n> Discrete 1|2|3|4|5|6|7|8 ——
——
Bool
OFF|ON|0|1
OFF
Remarks
If the marker is not visible in the selected area, enable the marker line function to extend the marker line to
the display area for better observation.
The PvT only supports setting the marker on Trace 1.
Return Format
The query returns 0 or 1.
Example
The following command enables the marker line of Marker 1.
:CALCulate:MARKer1:LINes:STATe ON or :CALCulate:MARKer1:LINes:STATe 1
The following query returns 1.
:CALCulate:MARKer1:LINes:STATe?
:CALCulate:MARKer<n>:MAXimum:LEFT
Syntax
:CALCulate:MARKer<n>:MAXimum:LEFT
Description
Searches for and marks the nearest peak which is located at the left side of the current peak and meets the
peak search condition.