User manual

Chapter 6 System Function RIGOL
RSA3000 User's Guide 6-7
Date/Time
Sets the system date and time.
1. Set Time
Sets the displayed system time of the analyzer. Press the Hour, Minute, and
Second softkeys respectively to set the time.
2. Set Date
Sets the displayed system date of the analyzer. Press the Year, Month, and
Day softkeys respectively to set the date. You can also press Date Format to
select whether the date is displayed in "YMD" or "MDY" form.
Security Clear
Press this key to perform the security clear function. This function includes the
following operations:
 Deletes all the files that users have saved, including the state files, trace state
files, screen files, measdata files, and limit files saved by users in all modes.
 Executes the factory resetting operation.
Language
RSA3000 supports multi-language menu, Chinese and English built-in help and
pop-up messages.
Press this key to select the desired display language.
Settings
1. Power Switch
Sets whether the power switch on the front panel is effective or not.
 Default: When the analyzer is powered on, press the power switch on the
front panel to start up the analyzer.
 Always: When the analyzer is powered on, it starts automatically.
2. Beep Switch
Turns on or off the beeper.
3. Volume
After you turn on the beeper, you can press this key to adjust the volume of the
beeper.