User manual

Chapter 6 System Function RIGOL
RSA3000 User's Guide 6-17
1. Save
Press this key to save the currently selected type of measurement data in the
default filename or user-defined filename.
The default filename is determined by the following methods:
 If you haven't input a filename by pressing the Save As key, its default
filename is measdata<n>.csv. Wherein, n refers to the file number of the
filenames that are named based on the naming mode in the current file
directory. The value of <n> is the existing maximum file number plus 1.
 If you have pressed the Save As key to input the filename abc, then the
file is saved to be "abc.csv". After that, press the key again, another file is
saved automatically with the filename "abc1.csv".
2. Save As
Press this key and then use the numeric keypad on the front panel to input the
filename. Then, press Save to save the corresponding Measurement Data file.
You can also touch the screen or use the mouse to touch or click the Save As
menu, and then input the filename with the keypad.
3. Save From Trace
If the data to be saved are traces, select the trace to be saved. You can select
any single trace from Trace1 to Trace6.
4. Data Type
Selects the measurement data type to be saved. The data types supported by
the instrument include trace, peak table, marker table, and measurement
results.
Limit
Press Limit to enter the limit line saving menu. The selected limit line is saved to the
file.
1. Save
Press this key to save the currently selected limit line in the default filename or
user-defined filename.
The default filename is determined by the following methods:
 If you haven't input a filename by pressing the Save As key, its default
filename is limit<n>.csv. Wherein, n refers to the file number of the
filenames that are named based on the naming mode in the current file
directory. The value of <n> is the existing maximum file number plus 1.
 If you have pressed the Save As key to input the filename abc, then the