RSA3000 Series Real-time Spectrum Analyzer Ultra-Real technology Frequency: up to 4.5 GHz Displayed average noise level (DANL): <-161 dBm (typical) Phase noise: <-102 dBc/Hz (typical) Level measurement uncertainty: <1.0 dB 4.5 GHz tracking generator Min.
RSA3000 Series Real-time Spectrum Analyzer Product Dimensions: Width × Height × Depth = 410 mm × 224 mm × 135 mm Based on the Ultra-Real technology, the high-speed real-time measurement mode allows you to acquire the signals in the analysis bandwidth seamlessly and make data analysis. It also provides various display modes, such as Spectrogram, Density, and PVT. Besides, FMT function is also available.
Specifications Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0℃ to 50℃ temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the measurement uncertainty. Typical: characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25℃).
GPSA Mode Frequency Frequency Readout Accuracy Marker Frequency Resolution span/(number of sweep points - 1) Marker Frequency Uncertainty ±(marker frequency readout × reference frequency accuracy + 1% × span + 10% × resolution bandwidth + marker frequency resolution) Frequency Counter Resolution 1 Hz Uncertainty ±(marker frequency readout × reference frequency accuracy + counter resolution) Frequency Span Range Standard 0 Hz, 100 Hz to maximum frequency Option RSA3000-BW1 0 Hz, 10 Hz to maximum
Amplitude Measurement Range fc ≥ 10 MHz Range DANL to +30 dBm Maximum Safe Input Level[1] DC Voltage 50 V +30 dBm, attenuation ≥ 40 dB, preamp off. CW RF Power -10 dBm, attenuation = 20 dB, preamp on. Maximum Damage Level CW RF Power +33 dBm (2 W) Displayed Average Noise Level (DANL) RSA3030 RSA3030-TG RSA3045 RSA3045-TG attenuation = 0 dB, sample detector, trace averages ≥ 50, tracking generator off, normalized to 1 Hz, 20℃ to 30℃, input impedance = 50 Ω.
Level Display Logarithmic Scale 1 dB to 200 dB Linear Scale 0 to reference level Number of Display Points 801 Number of Traces 6 Trace Detector normal, pos-peak, neg-peak, sample, RMS average, voltage average, and quasi-peak (Option RSA3000-EMC) Trace Function clear write, max hold, min hold, average, view, blank Scale Unit dBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W Frequency Response RSA3030 RSA3030-TG RSA3045 RSA3045-TG attenuation = 10 dB, relative to 50 MHz, 20℃ to 30℃ Preamp off 1
Input Attenuation Switching Uncertainty Setting Range Switching Uncertainty 0 dB to 50 dB, in 1 dB step fc = 50 MHz, relative to 10 dB, preamp off, 20℃ to 30℃ <0.3 dB Absolute Amplitude Accuracy fc = 50 MHz, peak detector, preamp off, attenuation = 10 dB, input signal level = -10 dBm, 20℃ to 30℃ Uncertainty <0.3 dB Reference Level Range Logarithmic Scale -170 dBm to +30 dBm, in 0.01 dB step Linear Scale 707 pV to 7.07 V, 0.11% (0.
RF Input VSWR RSA3030 RSA3030-TG RSA3045 RSA3045-TG attenuation ≥10 dB, preamp off VSWR 300 kHz to 3.0 GHz <1.6 (nominal) <1.6 (nominal) 3.0 GHz to 4.5 GHz <1.8 (nominal) Distortion Second Harmonic Intercept (SHI) Third-order Intercept (TOI) fc ≥ 50 MHz, input signal level = -20 dBm, attenuation = 0 dB, preamp off. +45 dBm fc ≥ 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation = 0 dB, preamp off.
Sweep Sweep Sweep Time Sweep Time Uncertainty span ≥ 10 Hz 1 ms to 4,000 s zero span 1 μs to 6,000 s span ≥ 10 Hz, RBW ≥ 1 kHz 5% (nominal) zero span (sweep time > 1 ms) 5% (nominal) Sweep Mode continue, single Trigger Trigger Trigger Source Trigger Delay free run, external 1, external 2, video span ≥ 10 Hz 0 to 500 ms zero span 0 to 500 ms Tracking Generator Tracking Generator Output RSA3030 RSA3030-TG RSA3045 RSA3045-TG Frequency Range - 100 kHz to 3.0 GHz - 100 kHz to 4.
RTSA Mode 10 MHz Real-time Analysis Bandwidth 25 MHz (Option RSA3000-B25) 40 MHz (Option RSA3000-B40) maximum span, default Kaiser Window Min. Signal Duration for 100% POI at the Full-Scale Accuracy 9.3 μs 7.82 μs (Option RSA3000-B25) 7.
General Specifications Display Type capacitive multi-touch screen Resolution 1024 × 600 pixels Size 10.1'' Color 24-bit color Printer Supported Protocol network printer Mass Memory Mass Memory Internal Storage 512 MB (nominal) External Storage USB storage device (not supplied) Power Input Voltage Range, AC 100 V to 240 V (nominal) AC Frequency 45 Hz to 440 Hz Power Consumption 55 W (typical), max.
Input/Output Front Panel Connector RF Input TG Output Impedance 50 Ω (nominal) Connector N-type female Impedance 50 Ω (nominal) Connector N-type female Frequency 10 MHz Output Level +3 dBm to +10 dBm, +7 dBm (typical) Impedance 50 Ω (nominal) Connector BNC female Frequency 10 MHz ± 5 ppm Input Level 0 dBm to +10 dBm Impedance 50 Ω (nominal) Connector BNC female Impedance ≥1 kΩ (nominal) Connector BNC female Level 5 V TTL level Internal/External Reference Internal Reference E
Order Information Model Standard Accessories Option Optional Accessories Description Order No. Real-time Spectrum Analyzer, 9 kHz to 3.0 GHz RSA3030 Real-time Spectrum Analyzer, 9 kHz to 4.5 GHz RSA3045 Real-time Spectrum Analyzer, 9 kHz to 3.0 GHz (with TG installed when leaving the factory) RSA3030-TG Real-time Spectrum Analyzer, 9 kHz to 4.
